120Eg User Guide - Upgrading Your System
9. While holding the drive in place turn the carrier upside down.
10. Line up the screw holes in the carrier with the screw holes in the drive. See
"Figure 4 - 14: Securing the Hard Drive to a Disk Carrier Tray" on page 4-19.
11. Using four screws of the appropriate size and length, secure the drive to the
carrier.
When installing a disk drive in a carrier tray always use the
screws that come with the device. Using longer screws or those
of different diameter may cause damage to the device.
Connecting to the onboard S-ATA channel
Figure 4 - 14: Securing the Hard Drive to a Disk Carrier Tray
12. Slide the disk carrier tray into the disk drive bay and secure it to the chassis
with the screws previously removed in step 4 above. See "Figure 4 - 15:
Installing the Disk Carrier Tray" on page 4-19.
Figure 4 - 15: Installing the Disk Carrier Tray
Caution
Connecting to the optional RAID or SCSI controller
4 - 19