Figure 4 - 21: Installing A Hard Disk Drive Into The Carrier; Figure 4 - 22: Installing The Carrier Into The Bay - NEC Express 5800 120Eg User Manual

120Eg User Guide - Upgrading Your System
8. Using the four screws removed earlier, attach the carrier to the drive.
D

Figure 4 - 21: Installing a Hard Disk Drive into the Carrier

9. While holding the drive carrier align it so that it engages the guide rails in the
drive bay. See "Figure 4 - 22: Installing the Carrier into the Bay" on page 4-28.
10. Push the drive carrier into the bay until the locking tab on the bottom of its
handle engages in the bottom frame slot.
11. Push the carrier handle up until the handle clicks and locks in place.

Figure 4 - 22: Installing the Carrier into the Bay

C
A
Hard disk drive
B
Drive carrier
C
Positioning rail
D Screws (4)
4 - 28
A
B