Removing or Installing the Processor Air Duct
To install or remove the DIMM or processor, you will need to remove the air duct.
Do not assemble the server without installing the air duct. No
duct installed in the system reduces cooling efficiency and can
affect performance or cause damage due to overheating.
Removing the Processor Air Duct
Follow these steps to remove the air duct.
1. See
"Preparing Your System for Upgrade" on page 4-3
2. Remove the side cover, see
3. Hold the left side of the air duct, and push the right end of the tab to release
from the chassis.
4. Remove the duct from the chassis.
120Eg User Guide - Upgrading Your System
Figure 4 - 3: Removing the Processor Air Duct
Caution
"Removing or Installing the Side Cover" on page 4-4
4 - 6
to prepare.
.