Boot Menu; Boot Settings Configuration Submenu; Boot Device Priority Submenu; Table 3 - 19: Boot Menu - NEC Express 5800 120Eg User Manual

Boot Menu

Feature
Boot Settings
Configuration
Boot Device Priority
Hard Disk Drives
Removable Drives
CD/DVD Drives

Boot Settings Configuration Submenu

Table 3 - 20: Boot Settings Configuration Submenu

Feature
Quick Boot
Quiet Boot
Bootup Num-Lock
PS/2 Mouse
Support
POST Error Pause
Hit 'F2' Message
Display
Scan User Flash
Area

Boot Device Priority submenu

The Boot Device Priority submenu specifies the boot sequence from the available
drives specified in the Hard Disk Drives, Removable Drives, and CD/DVD Drives
submenus, the onboard network interface controller (for PXE boot), and the EFI boot
function.
The factory-default boot order is listed below.
1. CD-ROM drive
2. Floppy disk drive
3. Hard disk drive
120Eg User Guide - Configuring Your System

Table 3 - 19: Boot Menu

Choices or Description
Display Only
Select submenu
Select submenu
Select submenu In the submenu, specify the 1st
drive from the option.
Select submenu In the submenu, specify the 1st
drive from the option.
Select submenu In the submenu, specify the 1st
drive from the option.
Choices or Description
Display Only
Disabled This option allows BIOS to skip
Enabled several tests during the POST
sequence. This will decrease
the time required for booting
the system.
Disabled If enabled, the BIOS will display
Enabled the splash screen during POST.
Press Esc to switch to the
POST execution screen.
Off Sets Num-Lock state after boot.
On
Disabled Specify BIOS support for PS/2
Enabled mouse.
Auto
Disabled Indicates whether POST is
Enabled aborted once at the end of
POST if an error occurs during
the execution of POST.
Disabled Enables or disables display of
Enabled "Press F2 to run Setup"
message during POST.
Disabled This option allows BIOS to scan
Enabled the flash ROM for user area.
3 - 16
Your Setting
Your Setting