Table of Contents
Advertisement
Note: You can not specify network pass. Specify the pass
on local computer.
4. Specify the location of crash dump file in the [Crash Dump] box.
Note: "Crash Dump File" is a binary file that can be read
with Windows Debugger.
5. Check the following check box on the [Option] box.
Dump Symbol Table
Dump All Thread Contexts
Add To Existing Log File
Create Crash Dump File
For more information on each function above, refer to Online Help.
6. Click [OK].
Network Monitor
Utilizing Network Monitor helps you to investigate and manage with network trouble.
To utilize Network Monitor, you need to restart the system after the installation has
completed, so we recommend to install Network Monitor before any network trouble
may occur.
1. Point to [Settings] from Start menu and click [Control Panel].
The [Control Panel] dialog box appears.
2. Double-click [Add/Remove Programs].
The [Add/Remove Programs] dialog box appears.
3. Click [Add/Remove Windows Component].
The [Windows Components Wizard] dialog box appears.
4. Check the [Management and Monitoring Tools] check box of the component
ON and click [Next].
5. If the setup asks to install the disk, insert Windows 2000 CD-ROM into the
CD-ROM drive and click [OK].
6. Click [Complete] in the [Windows Component Wizard] dialog box.
7. Click [Close] in the [Add/Remove Application] dialog box.
8. Close the [Control Panel] dialog box.
To start Network Monitor, point to [Program] → [Administrative Tools] and click
[Network Monitor]. For information on how to operate Network Monitor, refer to
Online Help.
120Eg User Guide - Appendix D
D - 33
Advertisement
Table of Contents
