Table of Contents
Advertisement
120Eg User Guide - Configuring Your System
Configuring Your System
Configuration and setup utilities are used to change your system configuration. You can
configure your system, as well as option boards you may add to your system, using the
BIOS Setup Utility. Several unique system parameters are configured using the BIOS
Setup, which is stored in the system FLASH memory.
If your system has been factory configured, the BIOS Setup Utility does not need to be
run unless you want to change the password or security features, add certain types of
option boards or devices, or upgrade your system board.
This chapter also provides information on several system configuration parameters that
are set by jumpers on the system board. However, these parameters do not usually
require change.
3 - 2
Advertisement
Table of Contents
