Table of Contents
Advertisement
Installation
Install a CPU in the following procedure.
1. See the section
2. Remove the components as follows:
3. Locate the CPU socket which you are going to install CPU.
4. Raise the locking lever on the socket.
Open the lever until it stops. The bar can be opened to approx.
120 degrees.
X
Figure 4 - 27: Opening the CPU Socket Locking Lever
5. Aligning the pins of the CPU with the socket, insert the CPU slowly and gently
into the socket.
Be aware of CPU direction. Pin layouts on two corners among
four differ from others to prevent an incorrect insertion. Confirm
the pin mark and pin layout on the socket, and insert the CPU
correctly.
120Eg User Guide - Upgrading Your System
"Preparing Your System for Upgrade" on page 4-3
Side cover (see
"Removing or Installing the Side Cover" on page 4-4
Processor air duct (see
)
page 4-6
O
"Removing or Installing the Processor Air Duct" on
Caution
Caution
4 - 34
to prepare.
)
Advertisement
Table of Contents
