Problems With Express Setup; Following Message Appeared When You Tried To Install Express Setup To The Hard Disk That Has Smaller Capacity Than The Specified Partition Size; The Message Can Not Be Displayed Correctly When Copying The Files From Cd-Rom Or Checking Cd-Rom; Express Setup Terminated And Asks To Input Setup Information - NEC Express 5800 120Eg User Manual

Problems with Express Setup

Following message appeared when you tried to install Express Setup to the hard
disk that has smaller capacity than the specified partition size:
The specified partition size has exceeded the capacity of the hard disk.
The setup created the partition at the maximum size that can be reserved on the hard disk.
Setup will continue the process.
OK
- It is not an abnormal condition. Press Enter to continue the installation.
The message can not be displayed correctly when copying the files from CD-ROM
or checking CD-ROM:
- Press R. When the message appears again even if you press R, restart the
Express Setup from the beginning. In case the same result occurred after the
restart of installation, contact Maintenance Service Company and ask them to
check the CD-ROM drive.

Express Setup terminated and asks to input setup information.

- There are some errors on the specified setup information.
Follow the instruction to input the correct value. It is not necessary to cancel
the installation. On Windows 2000, you might be asked to press Enter again
after the last reboot of the setup.

[Complete] appears on the [Role of Computer] screen.

- If you click [Complete] here, the setup will select the default value of Express
Setup for the later specification to continue the process.
<The Default Value for Windows 2000>
The specification of network protocol
Protocol :
Service :
Client :
Component :
Application :

[Complete] does not appear on [Role of Computer] screen.

- The [Complete] does not appear if the Setup File that has already been created
is loaded.
- [Complete] appears only when you first entered the [Role of Computer] screen.
Once you go to the next screen from [Role of Computer], the [Complete] will
not appear even if you enter [Back] to go back to the [Role of Computer] screen.
120Eg User Guide - Problem Solving
TCP/IP[DHCP Specified]
Select sharing Microsoft network files and printer.
Microsoft network client.
SNMP, IIS (Excluding Professional)
NEC ESMPRO Agent
Power Console Plus
(if optional SCSI RAID controller is installed in the system)
Promise Array Management
(if optional SATA RAID controller is installed in the system)
5 - 28