Table of Contents
Advertisement
120Eg User Guide - Upgrading Your System
6. Slide the disk carrier tray out the front of the chassis. See "Figure 4 - 16:
Removing the Disk Carrier Tray" on page 4-21.
Figure 4 - 16: Removing the Disk Carrier Tray
7. Turn the disk carrier tray upside down.
8. While holding the disk drive in place remove the four screws securing the drive
to the carrier and remove the drive. See "Figure 4 - 14: Securing the Hard
Drive to a Disk Carrier Tray" on page 4-19. Save the disk carrier tray and
screws for reinstallation.
9. If you are installing a new or replacement hard disk drive, perform steps 6
through 15 of
"Installing a Hard Disk Drive" on page 4-16
with the next step.
10. Slide the empty disk carrier tray into the bay and secure it to the chassis with
the screws previously removed in step 5 above. See "Figure 4 - 17: Installing
the Disk Carrier Tray" on page 4-21.
Figure 4 - 17: Installing the Disk Carrier Tray
4 - 21
. Otherwise, continue
Advertisement
Table of Contents
