120Eg User Guide - Upgrading Your System
11. Reinstall the left-hand side access panel on the system chassis. See
or Installing the Side Cover" on page 4-4
12. Plug in the system power cord(s), and turn on the system.
Note:
In the disk array configuration, the auto rebuild
function can be used. The auto rebuild function can record the
information saved in a defected hard disk into the new replaced
disk to recover the server to the state before the occurrence of
the fault.
The auto rebuild function is valid for disk arrays set to RAID1,
RAID5, or RAID10.
Refer to the manual supplied with your RAID controller for detail
explanation.
.
4 - 22
"Removing