Table of Contents
Advertisement
120Eg User Guide - Appendix E
BIOS/FW/etc. Update
This menu allows you to update the software module such as BIOS and firmware
of the server by using the update disk (3.5-inch floppy disk) that is distributed from
your customer service representative.
After rebooting the system, an update program is started automatically from the
floppy disk, and the various BIOS and firmware programs are updated.
Do not turn off the server while the update program is running. If
the update processing is discontinued, the system becomes
unable to start.
System Management
The parameters of BMC (Baseboard Management Controller) are set for remote
control and alert.
Help
Displays explanations about various functions of NEC EXPRESSBUILDER.
Return to the Top Menu
Choosing this menu returns to the Top Menu.
Caution
E - 7
Advertisement
Table of Contents
