Table of Contents
Advertisement
Configuring several network adapters as one team provides the server a tolerant
environment on any trouble and enhances throughput between the switches.
PROSet is necessary to utilize these features.
Follow the procedure below to install PROSet.
1. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2. The [Windows Explorer] dialog starts.
* Procedure in case of standard start menu
Click [Start menu] and click [Windows Explorer].
* Procedure in case of classic start menu
Click [Start menu], point to [Programs], [Accessories] and click [Windows
Explorer].
3. Run "PROSET.EXE" in the following directory.
CD-ROM DriveLetter:\WINNT\DOTNET\BC3\PROSET\WS03XP32
The [Intel(R) PROSet - Install Shield Wizard] dialog starts.
4. Click [Next].
5. Choose "I accept the terms in the license agreement" and click [Next].
6. Choose "Typical" and click [Next].
7. Click [Install].
8. When [Install Shield Wizard Completed] window is displayed, click [Finish].
9. Restart the system.
Network Driver
Specify the details of network driver.
One standard network driver that is mounted will be installed automatically, but the
link speed and Duplex mode need to be specified manually.
[When PROSet is not installed]
1. The [Local Area Connection Properties] dialog box appears.
* Procedure in case of standard start menu
1. Click [Start menu], Click [Control Panel], Click [Network Connections],
and Click [Local Area Connection].
* Procedure in case of classic start menu
1. Click [Start menu], Click [Settings] and Click [Network Connections].
The [Network Connections] dialog box appears.
2. 2. Right-click [Local Area Connection] and click [Properties] from pop-up
menu.
2. Click [Configure].
The property dialog box for network adapter appears.
3. Click the [Advanced] and specify the [Link Speed & Duplex] value the same as
the value specified for HUB.
4. Click [OK] on the property dialog box for network adapter.
120Eg User Guide - Appendix D
D - 12
Advertisement
Table of Contents
