Pci Configuration Submenu; Memory Configuration Submenu; Table 3 - 11: Pci Configuration Submenu; Table 3 - 12: Memory Configuration Submenu - NEC Express 5800 120Eg User Manual

Table 3 - 10: USB Configuration Submenu (Continued)
Feature
Port 64/60
Emulation
USB 2.0 Controller
USB 2.0 Controller
Mode

PCI Configuration Submenu

Feature
Onboard Video
Dual Monitor Video
Onboard NIC 1 (10/
100/1000)
Onboard NIC 1 (10/
100/1000) ROM

Memory Configuration Submenu

Table 3 - 12: Memory Configuration Submenu

Feature
DIMM 1A/1B/2A/2B² Display only
Extended Memory
Test
Memory Retest
120Eg User Guide - Configuring Your System
Choices or Description
Display Only
Disabled Enables I/O port 60h/64h
Enabled emulation for using the USB
keyboard with non-USB aware
operating systems.
Disabled Enables or disables USB 2.0
Enabled support
FullSpeed Selects the transfer speed on
HiSpeed USB 2.0.

Table 3 - 11: PCI Configuration Submenu

Choices or Description
Display Only
Disabled Enables or disables the
Enabled onboard video controller.
Disabled Selects which graphics
Enabled controller to use as the primary
boot device. Enabled selects
the onboard device.
Disabled Enables or disables the
Enabled onboard Network Interface
Controller (NIC).
Disabled Enables or disables the option
Enabled ROM scan for the onboard
Network Interface Controller
(NIC).
Choices or Description
Display Only
Displays the current status of
the memory bank. Disabled
(Normal indicates that a DIMM in the
Not installed bank has failed and the entire
Disabled) bank has been disabled.
1MB "1MB" indicates that the
1KB memory test is done per 1MB
Every location unit.
Disabled "1KB" indicates that the
memory test is done per 1KB
unit.
"Every location" tests every
memory location.
"Disabled" indicates that only
memory initialization is done.
Disabled Causes BIOS to retest the
Enabled whole memory on next boot.
3 - 9
Your Setting
Your Setting
Your Setting