Removing or Installing the Side Cover
The left side cover should be removed to access to built-in devices and/or mother board
in the server. It is not necessary to remove the right side cover.
Removing the Side Cover
Remove the left side cover as follows:
Observe the following instructions to use the server safely. Fail-
ure to follow these instructions may result in death or serious
personal injury. See
1. See the
2. Loosen the two screws (A in
3. Slide the cover slightly backwards.
4. Hold the side cover securely to remove it.
110Eh User Guide - Upgrading Your System
"Safety Notices" on page 1-xviii
Disconnect the power plug before working with the server.
"Preparing Your System for Upgrade" on page 4-3
A
Figure 4 - 1: Removing the Side Cover
Warning
Figure 4 - 1: Removing the Side Cover on page 4-4
4 - 4
for details.
to prepare.
).