Configuration; Configuration On Windows 7 / Windows 8 - NEC Quadro K600 User Manual

4 Configuration

This section describes screen settings and configuration on [NVIDIA Control Panel].

4.1 Configuration on Windows 7 / Windows 8

This section describes how to configure Quadro K600 using the [Screen Resolution] window.
※ On Windows 7/Windows8, you need to logon the system with "Administrator".
※ Take the steps below to open the [Screen Resolution] window.
･Click [Control Panel] → [Adjust Screen Resolution] in order.
・Right– click on desktop, and select [Screen Resolution (C)] from the right– click menu.
4.1.1. Setting multiple displays
Quadro K600 allows you to use two displays independently.
Take the steps below to specify multiple displays.
On this menu, you can specify multiple displays and display area (resolution).
If you select [Advanced settings] to open the Properties of [Quadro K600], you can specify
the refresh rate and Color Depth on the [Monitor] tab.
① Select any of the following from the
[Multiple
menu.
・[Duplicate these displays]
・[Extend these displays]
・[Show desktop only on *]
② Click the [Apply]
２１
displays]
Displays in clone mode.
Displays in independent mode.
Only show the screen 1 or 2.
pull–down