Table of Contents
Advertisement
120Eg User Guide - Appendix D
Caution
Reserve the partition to install the OS more than the
minimally required size.
If you select "Use Existing Array" at "New/Existing RAID
Configuration", the information included in the first partition
(excluding maintenance partition) will all be formatted and
deleted. The information included in the other partition will
be retained. In the figure below, describes the partition
which information will be deleted when maintenance
partition exists.
First Partition
Second
Third
Fourth
<Maintenance Partition>
Partition
Partition
Partition
Retained
Deleted
Retained
Retained
You can not re-install the system with the existing partition
that is upgraded to Dynamic Disk remained. Do not select
"Use Existing Array" at "New/Existing RAID Configuration".
If
"Create
New
Partition"
at
"New/Existing
RAID
Configuration" is selected, do not specify the value for the
partition more than 120 GB.
If you specify other than 4095 MB for the "Installing
Partition", it is necessary to convert to NTFS.
If "Use Existing Array" at "New/Existing RAID Configuration"
is selected but the partition other than the one to install
Windows 2000 does not exist (excluding maintenance
partition), Express Setup will reserve the maximum area of
the hard disk to install Windows 2000.
You can not go to the next screen if the specification is
incorrect.
On specification, an error may occur in relationship with the
specified contents of the former screen and require to go
back to modify the specification.
During the setup, the screen to specify the partition that
Windows 2000 is to be installed appears. The first 55 MB
area displayed on the screen is a partition that is used to
store the configuration information or utilities unique of the
server. We do not recommend to delete this area, but if you
do not want to reserve this 55 MB area, perform the
installation by manual setup. It is unable to delete this area
by Express Setup.
If you specify other than 120 GB for the actual area, you may
not create the partition specified as the entire area in sizes
more than 120 GB.
D - 26
Advertisement
Table of Contents
