Table of Contents
Advertisement
Table 5 - 2: Status Lamp Indications (Continued)
Flashing (amber)
Either of the following was detected in the
redundant power configuration:
AC power not supplied to one of the two
power supply units
Failure of one of the two power supply
units
A fan alarm was detected.
A temperature warning was detected.
A power supply alarm was detected.
120Eg User Guide - Problem Solving
5 - 20
Connect the power cord to supply power. If
the power supply unit is faulty, contact your
sales representative.
Check if the fan units are firmly connected.
If the STATUS lamp indication does not
change when the fans are normal, contact
your sales representative.
Check if the internal fans are clean and if the
fan units are firmly connected.
If the STATUS lamp indication does not
change when the fans are normal, contact
your sales representative.
Contact your sales representative.
Advertisement
Table of Contents
