Installation Of The Optional Network Board Driver; Installing Scsi Controller Driver - NEC Express 5800 120Eg User Manual

Table of Contents

Advertisement

Installation of the Optional Network Board Driver

1. Start Device Manager.
2. Click [Network adapters] and Double-Click [(Network Adapter Name)].
[(Network Adapter Name) Properties] appears.
Note: [(Intel(R)PRO/100 S and Intel(R)PRO/100 S Dual-
Port)] is the name of On-Board adapter. All other names show
the Optional Network Board.
3. Click [Driver] tab and click [Update Driver...]. [Hardware Update Wizard]
appears.
4. Select the [Install from a list or specific location (Advanced)] radio button and
click [Next].
5. Select the [Search for the best driver in these locations] radio button and check
off the [Search removable media (floppy, CD-ROM...)] check box.
6. Check the [Include this location in the search] check box and when using
[(N8104-86/111)],
driveletter:\WINNT\DOTNET\BC3\PRO100\WS03XP32].
Then click [Next].
7. Click [Finish].

Installing SCSI Controller Driver

If you utilize SCSI controller driver (INITIO INI-A10XU2W PCI SCSI Controller /
Adaptec SCSI Card 29320ALP -Ultra320 SCSI), install it according to the following
procedure:
1. Start [Device Manager] from [Start] menu → [Control Panel]→
[Administrative Tools] → [Computer Management].
2. Double click the SCSI Controller driver which Device Manager lists as
unknown device.
3. Click [Update Driver].
4. When the "Update Device Driver Wizard" appears, select "Install from a list or
specific location [Advanced]" and click [Next].
5. Select "Don't search. I will choose the driver to install" and click [Next].
6. Click [Have Disk..].
7. Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into
the floppy disk drive, enter "a:\" into "copy manufacturer's file from:" and
click [OK].
8. Specify the following driver and click [Next].
[INITIO INI-A10XU2W PCI SCSI Controller] (When board is installed.)
[Adaptec SCSI Card 29320ALP -Ultra320 SCSI] (When board is installed.)
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.
120Eg User Guide - Appendix D
D - 14
specify
[CD-ROM

Advertisement

Table of Contents
loading

Table of Contents