Table of Contents
Advertisement
4. Select the disks for the new array and press Insert. To deselect any disk,
highlight the disk and press Delete.
5. Press Enter when both disks for the new array are selected.
The Array Properties menu displays.
Assigning Array Properties
assigned, you cannot change the array properties using the
ACU. Instead, use Adaptec Storage Manager' - Browser
Edition. (See
Browser Edition User's Guide
Builder's online documentation for details.)
To assign properties to the new array:
1. In the Array Properties menu, select an array type and press Enter. Note that
only the available array types, RAID0 and RAID1, are displayed. Each of
these types requires two drives.
2. Type in an optional label for the array and press Enter.
120Eg User Guide - Configuring Your System
Note: Once the array is created and its properties are
SATA HostRAID Adaptec Storage Manager
included in the NEC Express
3 - 22
Advertisement
Table of Contents
