Configuration; Configuration On Windows 7 / Windows 8 - NEC Quadro K5000 User Manual

4 Configuration

This section describes screen settings and configuration on [NVIDIA Control Panel].

4.1 Configuration on Windows 7 / Windows 8

This section describes how to configure Quadro K5000 using the [Screen Resolution] window.
※ On Windows 7/Windows8, you need to logon the system with "Administrator".
※ Take the steps below to open the [Screen Resolution] window.
･Click [Control Panel] → [Adjust Screen Resolution] in order.
・Right– click on desktop, and select [Screen Resolution (C)] from the right– click menu.
4.1.1 Setting multiple displays
Quadro K5000 allows you to use four displays independently.
Take the steps below to specify multiple displays.
On this menu, you can specify multiple displays and display area (resolution).
If you select [Advanced settings] to open the Properties of [Quadro K5000], you can specify
the refresh rate and Color Depth on the [Monitor] tab.
① Select any of the following from the
[Multiple displays] pull–down menu.
・[Duplicate desktop on 1 and 2]
・[Duplicate desktop on 1 and 3]
・[Duplicate desktop on 1 and 4]
・[Extend desktop to this display]
To extend the screen, select a target
display, and select [Extend desktop to
this display].
② Click [Apply].
２２
Displays in clone mode.
Displays in clone mode.
Displays in clone mode.
This option can be specified if
the currently selected display is
not used.