Table of Contents
Advertisement
Installing Maintenance Utilities
Various maintenance utilities are contained in your NEC EXPRESSBUILDER CD-
ROM. See Chapter 6 for installing the utilities to your server or management
workstations.
Updating the System - Installing Service Pack -
Update the system in the situation below:
Modified system configuration.
Recovered the system using recovery process.
Log on to the system with the account that has administrative authority (e.g.
Administrator) and insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM
drive of the server.
[Setup Software] in [Master Control Menu] screen appears, so left-click the item.
Click [Update the System] from the menu and the setup will start. After that, follow
the message to continue the setup process and apply Service Pack.
Making Backup Copies of System Information
The system information includes the current BIOS settings and any specific
information for the server.
Save the information after completing the system setup.
Without the backup data, you will not be able to recover the information.
You can save the information by the following process.
1. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive and
reboot the system.
2. Select [Tools].
3. Select [Off-line Maintenance Utility].
4. Select [System Information Management].
5. Insert a floppy disk into the floppy disk drive.
6. Select [Save].
120Eg User Guide - Appendix D
D - 34
Advertisement
Table of Contents
