Table of Contents
Advertisement
For example, if the mounted memory size is 512 MB, the minimally required partition
size will be calculated by the above formula as follows:
1000 MB + (512 MB * 1.5) + (512 MB + 12 MB) = 2292 MB
If you want to install using Express Setup, calculate the
minimally required partition size as follows:
Re-installing to the hard disk which has been upgraded to Dynamic Disk
You cannot re-install Windows 2000 with the current partition of the hard disk
upgraded to Dynamic Disk kept remained.
If you want to keep the current partition remained, see Appendix D to re-install the
system.
120Eg User Guide - Appendix D
The above paging file size is necessary for collecting debug
information (memory dump). If you set the default value of
paging file size smaller than the 'recommended' value, the
accurate debug information (memory dump) may not be
collected.
The maximum paging file size which can be set on one
partition is 4095 MB. If the above paging file size exceeds
4095 MB, specify 4095 MB for the paging file size.
The dump file size for the system with more than 2 GB
memory mounted is '2048 MB + 12 MB'.
If you install any application program or the like, add neces-
sary space to the partition to install these programs.
Notes:
If you do not apply Windows 2000 Service Pack
The larger value of either one: 'Minimum Partition Size'
described above, or '4095 MB'.
If you want to apply Windows 2000 Service Pack
The larger value of either one: 'Minimum Partition Size'
described above + 850 MB or '4095 MB'.
Caution
D - 22
Advertisement
Table of Contents
