NEC Express 5800 120Eg User Manual page 235

Table of Contents

Advertisement

120Eg User Guide - Appendix D
If you select "Use Existing Array" at "New/Existing RAID
Configuration", the information included in the first partition
(excluding maintenance partition) will all be formatted and
deleted. The information included in the other partition will
be retained. In the figure below, describes the partition
which information will be deleted when maintenance
partition exists.
First Partition
Second
Third
Fourth
<Maintenance Partition>
Partition
Partition
Partition
Retained
Deleted
Retained
Retained
You can not re-install the system with the existing partition
that is upgraded to Dynamic Disk remained. Do not select
"Use Existing Array" at "New/Existing RAID Configuration".
If
"Create
New
Partition"
at
"New/Existing
RAID
Configuration" is selected, do not specify the value for the
partition more than 120GB.
If you specify other than 4095MB for the "Installing Partition",
it is necessary to convert to NTFS.
If "Use Existing Array" at "New/Existing RAID Configuration"
is selected but the partition other than the one to install
W i n d o w s S e r v e r 2 0 0 3 d o e s n o t e x i s t ( e x c l u d i n g
maintenance partition), Express Setup will reserve the
maximum area of the hard disk to install Windows Server
2003.
You can not go to the next screen if the specification is
incorrect.
On specification, an error may occur in relationship with the
specified contents of the former screen and require to go
back to modify the specification.
During the setup, the screen to specify the partition that
Windows Server 2003 is to be installed appears. The first
55MB area displayed on the screen is a partition that is used
to store the configuration information or utilities unique of the
server. We do not recommend to delete this area, but if you
do not want to reserve this 55MB area, perform the
installation by manual setup. It is unable to delete this area
by Express Setup.
If you specify other than 120GB for the actual area, you may
not create the partition specified as the entire area in sizes
more than 120GB.
D - 10

Advertisement

Table of Contents
loading

Table of Contents