Standard Features; High Performance - NEC Express 5800 120Eg User Manual

Standard Features

High performance


Intel Xeon Processor
DDR333 integrated SDRAM
High-speed 1000BASE-T/100BASE-TX/
10BASE-T interface (1000Mbps/100Mbps/
10Mbps supported)
High-speed disk access
(Two serial ATA channels)
High-reliability
Memory monitoring feature (single-bit error
correction/double-bit error detection)
CPU/memory degradation feature (logical
isolation of a failed device)
Temperature detection
Error notification
Internal fan monitoring feature
Internal voltage monitoring feature
BIOS password feature
Security feature (security lock)
Disk array (option)
Hot Swap S-ATA or SCSI HDD (optional)
Redundant hot swap power supply (optional)
Management Utilities
NEC ESMPRO
Power Saving Feature
Sleep feature
(available for Windows 20003/2000)
120Eg User Guide - System Overview
Expandability
Many Available Features
Self-diagnosis
Maintenance Features
Easy and Fine Setup
1 - 16
Wide variety of optional I/O slots
Two 64-bit, 66MHz PCI-X slots
Two 32-bit, 33MHz PCI slot
Large memory of up to 4 GB
Four non hot swap hard disk drive bays (SCSI
or S-ATA)
Four hot swap hard disk drive bays (S-ATA)
Six hot swap hard disk drive bays (SCSI)
Remote power-on feature
Up to two Intel Xeon processors
USB interface (A USB-support driver is
required.)
Convert to rack-mount type (Rack Conversion
Kit is required.)
Graphic accelerator "RAGE XL" support
El Torito Bootable CD-ROM (no emulation
mode) format support
POWER switch mask
Software power-off
Remote power-on feature
AC-LINK feature
Power On Self-Test (POST)
Test and Diagnosis
Memory dump feature using the DUMP (NMI)
switch
NEC EXPRESSBUILDER (system setup
utility)
SETUP (BIOS setup utility)
Configuration Diskette Creator