Installing the tape device driver
Only install the device drive if you intend to use Windows 2000 Backup, Windows XP Backup, or
Windows Server 2003 Backup (found in their respective System Tools folder).
Install the device driver in the basic processing unit with the supplied floppy disk. Prepare the
floppy disk beforehand.
For Windows 2000 Users
(Screen shots from the N8151-53 are used to illustrate the steps that follow. If you are using the
N8151-50A, places labeled SDX-520V will appear on your screen as SDX-420V.)
1
Click the [Start] button, point to [Settings], click [Control Panel], and then double-click
[System].
The [System Properties] dialog box appears.
2
Click the [Hardware] tab, then click the [Device Manager] button.
The [Device Manager] window appears.
3
Make sure that [SONY SDX-520V
(SDX-420V)] appears in [Other
devices], and then double-click it.
The [SONY SDX-520V(SDX-420V)
Properties] dialog box appears.
82 Built-in AIT