7- Connect The Voipu Circuits To The Data Network; Ethernet Port Specification; Ethernet Cable; Maximum Cable Length - NEC XN120 Manual

Connect the VOIPU Circuits to the Data Network

7- Connect the VOIPU Circuits to the Data Network

1 Connect each VOIPU circuit to
the data network.
At this point you should also
connect the EXIFU-A1
Ethernet port to the data
network.
8
Ethernet port

Ethernet Port Specification

Standard IEEE802.3 10Base-T and 100Base-TX compliant
Access CSMA/CD
Interface Speed
Cable

Ethernet Cable

The connections of the Ethernet cable depend on the device that you
connect. When connecting to an Ethernet hub you would normally use
a straight cable (some hubs will take either a straight or cross cable)
When connecting directly to the NIC card in your PC you must use a
cross cable.
RJ45 Ethernet RJ45 colour
socket on the code
VOIPU
1 White/Orange
2 Orange/White
3 White/Green
6 Green/White

Maximum Cable Length

The maximum cable length is 100 metres for straight and cross cables.
10Mbps/100Mbps Auto Negotiation
CAT5 or better Straight/Cross
Ethernet
Straight Cable
1
2
3
6
XN120 Voice Over IP Card Guide
Ethernet
Cross Cable
3
6
1
2