3Com 4210 9-Port Configuration Manual page 725

To do...
Start the test
Display test results
5) Configuring jitter test on remote-ping client
Follow these steps to configure jitter test on remote-ping client:
To do...
Enter system view
Enable the remote-ping client
function
Create a remote-ping test
group and enter its view
Configure the destination IP
address
Configure the destination port
Configure the source IP
address
Configure the source port
Configure the test type
Configure the number of
probes per test
Configure the maximum
number of history records that
can be saved
Use the command...
test-enable
display remote-ping results
[ admin-name operation-tag ]
Use the command...
system-view
remote-ping-agent enable
remote-ping
administrator-name
operation-tag
destination-ip ip-address
destination-port
Port-number
source-ip ip-address
source-port port-number
test-type jitter [ codec
codec-value ]
count times
history-records number
1-12
Remarks
Required
Required
You can execute the command
in any view.
Remarks
—
Required
By default, the remote-ping
client function is disabled.
Required
By default, no test group is
configured.
Required
The destination address must
be the IP address of a UDP
listening service on the
remote-ping server.
By default, no destination
address is configured.
Required
The destination port must be
the port of a UDP listening
service on the remote-ping
server.
By default, no destination port
is configured.
Optional
By default, no source IP
address is configured.
Optional
By default, no source port is
configured.
Required
By default, the test type is
ICMP.
Optional
By default, each test makes
one probe.
Optional
By default, the maximum
number is 50.