Configuring The Sending Mode Of Accounting Start Requests - 3Com 4210 9-Port Configuration Manual

use the assigned Attribute 28, idle-timeout. You can configure the attribute ignoring function on NAS 2
to ignore Attribute 28.
Figure 2-1 Network diagram for the RADIUS authorization attribute ignoring function
NAS 1
Host 1
Follow these steps to configure the RADIUS authorization attribute ignoring function:
To do...
Enter system view
Create a RADIUS
scheme and enter
its view
Configure the
RADIUS
authorization
attribute ignoring
function
In a RADIUS scheme, you can configure:
One standard attribute ignoring command
One proprietary attribute ignoring command per vendor
Up to three attribute ignoring commands in total

Configuring the Sending Mode of Accounting Start Requests

Table 2-13 Configure the sending mode of accounting start requests
Operation
Enter system view
Create a RADIUS scheme and
enter its view
IP network
Switch
Use the command...
system-view
radius scheme
radius-scheme-name
attribute-ignore { standard |
vendor vendor-id } type type-value
system-view
radius scheme
radius-scheme-name
RADIUS server
NAS 2
Host 2
—
Required
By default, a RADIUS scheme named
"system" has already been created in
the system.
Required
Disabled by default.
Command
2-14
Remarks
Remarks
—
—