Managing A Cluster Through The Management Device - 3Com 4210 9-Port Configuration Manual

Operation
Enter Ethernet port view
Enable NTDP on the port
Enabling the cluster function
Follow these steps to enable the cluster function:
Operation
Enter system view
Enable the cluster function
globally
Accessing the shared FTP/TFTP server from a member device
Follow these steps to access the shared FTP/TFTP server from a member device:
Operation
Access the shared FTP server of the
cluster
Download a file from the shared TFTP
server of the cluster
Upload a file to the shared TFTP server
of the cluster

Managing a Cluster through the Management Device

You can manage the member devices through the management device, for example, adding/removing
a cluster member, rebooting a member device, logging into a member device, and so on.
Follow these steps to manage a cluster through management device:
Command
interface interface-type
interface-number
ntdp enable
Command
system-view
cluster enable
Command
ftp cluster
tftp cluster get source-file
[ destination-file ]
tftp cluster put source-file
[ destination-file ]
1-15
Description
—
Required
Description
—
Optional
By default, the cluster function
is enabled.
Description
Optional
Optional
Optional