3Com 4210 9-Port Configuration Manual page 721

To do...
Configure test start
time and lifetime
Enable routing table
bypass
Set the maximum
number of concurrent
tests
Configure the probe
timeout time
Start the test
Display test results
3) Configuring FTP test on remote-ping client
Follow these steps to configure FTP test on remote-ping client:
To do...
Enter system view
Enable the remote-ping
client function
Create a remote-ping
test group and enter its
view
Configure the
destination IP address
Configure the source IP
address
Configure the source
port
Configure the test type
Configure the number
of probes per test
Configure a test
description
Use the command...
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime
sendpacket passroute
remote-ping-agent
max-requests number
timeout time
test-enable
display remote-ping results
[ admin-name operation-tag ]
Use the command...
system-view
remote-ping-agent enable
remote-ping
administrator-name
operation-tag
destination-ip ip-address
source-ip ip-address
source-port port-number
test-type ftp
count times
description string
1-8
Remarks
Optional
By default, no test start time and lifetime
is configured.
Optional
By default, routing table bypass is
disabled.
Optional
By default, five concurrent tests are
allowed.
Optional
By default, a probe times out in three
seconds.
Required
Required
You can execute the command in any
view.
Remarks
—
Required
By default, the remote-ping client
function is disabled.
Required
By default, no test group is configured.
Required
By default, no destination address is
configured.
Required
By default, no source IP address is
configured.
Optional
By default, no source port is configured.
Required
By default, the test type is ICMP.
Optional
By default, each test makes one probe.
Optional
By default, no description information is
configured.