Introduction To Dhcp; Dhcp Overview; Dhcp Ip Address Assignment; Ip Address Assignment Policy - 3Com 4210 9-Port Configuration Manual

1

DHCP Overview

Introduction to DHCP

With networks getting larger in size and more complicated in structure, lack of available IP addresses
becomes the common situation the network administrators have to face, and network configuration
becomes a tough task for the network administrators. With the emerging of wireless networks and the
using of laptops, the position change of hosts and frequent change of IP addresses also require new
technology. Dynamic host configuration protocol (DHCP) is developed to solve these issues.
DHCP adopts a client/server model, where the DHCP clients send requests to DHCP servers for
configuration parameters; and the DHCP servers return the corresponding configuration information
such as IP addresses to implement dynamic allocation of network resources.
A typical DHCP application includes one DHCP server and multiple clients (such as PCs and laptops),
as shown in Figure
Figure 1-1 Typical DHCP application

DHCP IP Address Assignment

IP Address Assignment Policy

Currently, DHCP provides the following three IP address assignment policies to meet the requirements
of different clients:
Manual assignment. The administrator configures static IP-to-MAC bindings for some special
clients, such as a WWW server. Then the DHCP server assigns these fixed IP addresses to the
clients.
Automatic assignment. The DHCP server assigns IP addresses to DHCP clients. The IP addresses
will be occupied by the DHCP clients permanently.
Dynamic assignment. The DHCP server assigns IP addresses to DHCP clients for predetermined
period of time. In this case, a DHCP client must apply for an IP address again at the expiration of
the period. This policy applies to most clients.
1-1.
1-1