Displaying And Maintaining Information Center - 3Com 4210 9-Port Configuration Manual

Operation
Enable the information center
Enable information output to
the SNMP NMS
Configure the output rules of
system information
Set the format of time stamp in
the output information
To send information to a remote SNMP NMS properly, related configurations are required on both the
switch and the SNMP NMS.

Displaying and Maintaining Information Center

After the above configurations, you can execute the display commands in any view to display the
running status of the information center, and thus validate your configurations. You can also execute the
reset commands in user view to clear the information in the log buffer and trap buffer.
Table 1-16 Display and maintain information center
Operation
Display information on an
information channel
Display the operation status of
information center, the
configuration of information
channels, the format of time
stamp
Display the status of log buffer
and the information recorded in
the log buffer
Display the summary
information recorded in the log
buffer
Display the status of trap buffer
and the information recorded in
the trap buffer
Command
info-center enable
info-center snmp channel
{ channel-number |
channel-name }
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap |
debug } { level severity | state
state } ]*
info-center timestamp { log |
trap | debugging } { boot |
date | none }
Command
display channel [ channel-number |
channel-name ]
display info-center [ unit unit-id ]
display logbuffer [ unit unit-id ] [ level
severity | size buffersize ]* [ | { begin |
exclude | include } regular-expression ]
display logbuffer summary [ level
severity ]
display trapbuffer [ unit unit-id ] [ size
buffersize ]
1-14
Description
Optional
Enabled by default.
Optional
By default, the switch outputs
trap information to SNMP
through channel 5.
Optional
Refer to Table 1-8 for the
default output rules of system
information.
Optional
By default, the time stamp
format of the information output
to the SNMP NMS is date.
Description
Available in any
view