Habp Client Configuration; Displaying Habp - 3Com 4210 9-Port Configuration Manual

HABP Client Configuration

HABP clients reside on switches attached to HABP servers. After you enable HABP for a switch, the
switch operates as an HABP client by default. So you only need to enable HABP on a switch to make it
an HABP client.
Table 2-2 Configure an HABP client
Operation
Enter system view
Enable HABP

Displaying HABP

After performing the above configuration, you can display and verify your HABP-related configuration
by execute the display command in any view.
Table 2-3 Display HABP
Display HABP configuration and status
Display the MAC address table maintained by
HABP
Display statistics on HABP packets
Command
system-view
habp enable
Operation
—
Optional
HABP is enabled by default. And a switch
operates as an HABP client after you
enable HABP for it.
Command
display habp
display habp table
display habp traffic
2-2
Remarks
Remarks
These commands
can be executed in
any view.