Device Management; Introduction To Device Management; Device Management Configuration; Device Management Configuration Tasks - 3Com 4210 9-Port Configuration Manual

4

Device Management

Introduction to Device Management

Device Management includes the following:
Reboot the Ethernet switch
Configure real-time monitoring of the running status of the system
Specify the APP to be used at the next reboot
Update the Boot ROM
Identifying and Diagnosing Pluggable Transceivers

Device Management Configuration

Device Management Configuration Tasks

Table 4-1 Device management configuration tasks

Rebooting the Ethernet Switch

Scheduling a Reboot on the Switch
Configuring Real-time Monitoring of the Running Status of the System
Specifying the APP to be Used at Reboot
Upgrading the Boot ROM
Identifying and Diagnosing Pluggable Transceivers
Rebooting the Ethernet Switch
You can perform the following operation in user view when the switch is faulty or needs to be rebooted.
Before rebooting, the system checks whether there is any configuration change. If yes, it prompts
whether or not to proceed. This prevents the system from losing the configurations in case of shutting
down the system without saving the configurations
Table 4-2 Reboot the Ethernet switch
Operation
Reboot the Ethernet switch
Task
Command
reboot [ unit unit-id ]
4-1
Remarks
Optional
Optional
Optional
Optional
Optional
Optional
Description
Available in user view