3Com 4210 9-Port Configuration Manual page 728

To do...
Enable history record
Configure the retaining time of
history record
Configure statistics interval and
the maximum number of
retained statistics information
Configure the retaining time of
statistics information
Configure test start time and
lifetime
Enable routing table bypass
Configure the TTL
Configure the automatic test
interval
Configure the probe timeout
time
Configure the type of service
Start the test
Display test results
7) Configuring TCP test on remote-ping client
Follow these steps to configure TCP test on remote-ping client:
To do...
Enter system view
Use the command...
history-record enable
history keep-time keep-time
statistics { interval interval |
max-group number }
statistics keep-time keep-time
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime
sendpacket passroute
ttl number
frequency interval
timeout time
tos value
test-enable
display remote-ping results
[ admin-name operation-tag ]
Use the command...
system-view
1-15
Remarks
Optional
By default, history record is not
enabled.
Optional
By default, the retaining time of
history record is 120 minutes.
Optional
By default, statistics interval is
120 minutes and up to two
pieces of statistics information
can be retained.
Optional
By default, the retaining time of
statistics information is 120
minutes.
Optional
By default, no test start time
and lifetime is configured.
Optional
By default, routing table bypass
is disabled.
Optional
By default, TTL is 20.
The sendpacket passroute
command voids the ttl
command.
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will
be made.
Optional
By default, a probe times out in
three seconds.
Optional
By default, the service type is
zero.
Required
Required
You can execute the command
in any view.
Remarks
—