Mac Address Authentication Enhanced Function Configuration; Mac Address Authentication Enhanced Function Configuration Tasks - 3Com 4210 9-Port Configuration Manual

Operation
Set the user name in
fixed mode for MAC
authentication
Specify an ISP
domain for MAC
authentication
Configure the MAC
authentication timers
If MAC authentication is enabled on a port, you cannot configure the maximum number of dynamic
MAC address entries for that port (through the mac-address max-mac-count command), and
vice versa.
If MAC authentication is enabled on a port, you cannot configure port security (through the
port-security enable command) on that port, and vice versa.
You can configure MAC authentication on a port before enabling it globally. However, the
configuration will not take effect unless MAC authentication is enabled globally.

MAC Address Authentication Enhanced Function Configuration

MAC Address Authentication Enhanced Function Configuration Tasks

Table 1-2 MAC address authentication enhanced function configuration tasks
Operation
Configure a Guest VLAN
Configure the maximum
number of MAC address
authentication users allowed to
access a port
Command
Set the user
name in fixed mac-authentication authmode
mode for MAC usernamefixed
authentication
Configure the mac-authentication
user name authusername username
Configure the
mac-authentication
password authpassword password
mac-authentication domain isp-name
mac-authentication timer { offline-detect
offline-detect-value | quiet quiet-value |
server-timeout server-timeout-value }
Description
Optional
Optional
1-3
Optional
By default, the user
name is "mac" and
no password is
configured.
Required
The default ISP
domain (default
domain) is used by
default.
Optional
The default timeout
values are as
follows:
300 seconds for
offline detect timer;
60 seconds for quiet
timer; and
100 seconds for
server timeout timer
Related section
Section "Configuring a Guest
Section "Configuring the Maximum
Number of MAC Address Authentication
Users Allowed to Access a
Remarks
VLAN"
Port"