3Com 4210 9-Port Configuration Manual page 729

To do...
Enable the remote-ping
client function
Create a remote-ping
test group and enter its
view
Configure the destination
address
Configure the destination
port
Configure the source IP
address
Configure the source
port
Configure the test type
Configure the number of
probes per test
Configure a test
description
Configure the automatic
test interval
Enable history record
Configure the retaining
time of history record
Use the command...
remote-ping-agent enable
remote-ping
administrator-name
operation- tag
destination-ip ip-address
destination-port
port-number
source-ip ip-address
source-port port-number
test-type { tcpprivate |
tcppublic }
count times
description string
frequency interval
history-record enable
history keep-time
keep-time
1-16
Remarks
Required
By default, the remote-ping client
function is disabled.
Required
By default, no test group is configured.
Required
This IP address and the one configured
on the remote-ping server for listening
services must be the same.
By default, no destination address is
configured.
Required in a Tcpprivate test
A Tcppublic test is a TCP connection
test on port 7. Use the
remote-ping-server tcpconnect
ip-address 7 command on the server to
configure the listening service port;
otherwise the test will fail. No port
number needs to be configured on the
client; any destination port number
configured on the client will not take
effect.
By default, no destination port number is
configured.
Optional
By default, the source IP address is not
specified.
Optional
By default, no source port is specified.
Required
By default, the test type is ICMP.
Optional
By default, one probe is made per time.
Optional
By default, no description information is
configured.
Optional
By default, the automatic test interval is
zero seconds, indicating no automatic
test will be made.
Optional
By default, history record is not enabled.
Optional
By default, the retaining time of history
record is 120 minutes.