3Com 4210 9-Port Configuration Manual page 55

To do...
Enter system view
Enable the Web server
Disable the Web server
To improve security and prevent attack to the unused Sockets, TCP 80 port (which is for HTTP service)
is enabled/disabled after the corresponding configuration.
Enabling the Web server (by using the undo ip http shutdown command) opens TCP 80 port.
Disabling the Web server (by using the ip http shutdown command) closes TCP 80 port.
Use the command...
system-view
ip http shutdown
undo ip http shutdown
6-4
Remarks
—
Required
By default, the Web server is
enabled.
Required