3Com 4210 9-Port Configuration Manual page 155

Switch 4210 family

Hide thumbs Also See for 4210 9-Port:

Table of Contents

[Sysname-Ethernet1/0/2] quit

[Sysname] interface Ethernet1/0/3

[Sysname-Ethernet1/0/3] port link-aggregation group 1

Adopting dynamic LACP aggregation mode

# Enable LACP on Ethernet1/0/1 through Ethernet1/0/3.

<Sysname> system-view

[Sysname] interface Ethernet1/0/1

[Sysname-Ethernet1/0/1] lacp enable

[Sysname-Ethernet1/0/1] quit

[Sysname] interface Ethernet1/0/2

[Sysname-Ethernet1/0/2] lacp enable

[Sysname-Ethernet1/0/2] quit

[Sysname] interface Ethernet1/0/3

[Sysname-Ethernet1/0/3] lacp enable

The three LACP-enabled ports can be aggregated into one dynamic aggregation group to implement

load sharing only when they have the same basic configuration (such as rate, duplex mode, and so on).

Show Quick Links

Chapters

Table of Contents

Do you have a question about the 4210 9-Port and is the answer not in the manual?