3Com 4210 9-Port Configuration Manual page 730

To do...
Configure statistics
interval and the
maximum number of
retained statistics
information
Configure the retaining
time of statistics
information
Configure test start time
and lifetime
Enable routing table
bypass
Configure the TTL
Configure the probe
timeout time
Configure the maximum
number of history
records that can be
saved
Configure the type of
service
Start the test
Display test results
8) Configuring UDP test on remote-ping client
Follow these steps to configure UDP test on remote-ping client:
To do...
Enter system view
Enable the
remote-ping client
function
Create a remote-ping
test group and enter
its view
Use the command...
statistics { interval interval |
max-group number }
statistics keep-time
keep-time
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now }
lifetime lifetime
sendpacket passroute
ttl number
timeout time
history-records number
tos value
test-enable
display remote-ping
results [ admin-name
operation-tag ]
Use the command...
system-view
remote-ping-agent enable
remote-ping
administrator-name
operation- tag
1-17
Remarks
Optional
By default, statistics interval is 120
minutes and up to two pieces of statistics
information can be retained.
Optional
By default, the retaining time of statistics
information is 120 minutes.
Optional
By default, no test start time and lifetime
is configured.
Optional
By default, routing table bypass is
disabled.
Optional
By default, TTL is 20.
The sendpacket passroute command
voids the ttl command.
Optional
By default, a probe times out in three
seconds.
Optional
By default, the maximum number is 50.
Optional
By default, the service type is zero.
Required
Required
The display command can be executed
in any view.
Remarks
—
Required
By default, the remote-ping client function
is disabled.
Required
By default, no test group is configured.