Displaying Device Configuration - 3Com 4210 9-Port Configuration Manual

Displaying Device Configuration

After the above configuration, you can execute the display command in any view to display the current
and initial configurations of the device, so as to verify your configuration.
Table 1-5 Display Device Configuration
Operation
Display the initial configuration file
saved in the storage device
Display the configuration file used
for this and next startup
Display the current VLAN
configuration of the device
Display the validated configuration in
current view
Display current configuration
Command
display saved-configuration [ unit
unit-id ] [ by-linenum ]
display startup [ unit unit-id ]
display current-configuration vlan
[ vlan-id ] [ by-linenum ]
display this [ by-linenum ]
display current-configuration
[ configuration [ configuration-type ] |
interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ |
{ begin | exclude | include }
regular-expression ]
1-5
Description
You can execute
the display
command in any
view.