Using Cli Editing Features And Shortcuts; Moving The Cursor On The Command Line - Motorola RFS Series Reference Manual

1-8 Motorola RF Switch CLI Reference Guide
• Enter commands in uppercase, lowercase, or mixed case. Only passwords are case
sensitive
• If an instance name (or other parameter) contains whitespace, the name must be
enclosed in quotes
RFSwitch.(Cfg)> spol "Default Switch Policy"
RFSwitch.(Cfg).SPolicy.[Default Switch Policy]>

1.4 Using CLI Editing Features and Shortcuts

A variety of shortcuts and edit features are available. The following describe these
features:
•

Moving the Cursor on the Command Line

• Completing a Partial Command Name
• Deleting Entries
• Re-displaying the Current Command Line
• Transposing Mistyped Characters
• Controlling Capitalization
1.4.1 Moving the Cursor on the Command Line
Table 1.2 shows the key combinations or sequences to move the cursor on the command
line. Ctrl defines the Control key, which must be pressed simultaneously with its
associated letter key.
Esc supports the Escape key (which must be pressed first), followed by its associated
letter key. Keys are not case sensitive. Specific letters are used to provide an easy way of
remembering their functions. In
between a letter and its function.
NOTE: Commands starting with
ignored and not executed. Any space before a CLI command is ignored
in execution.
Table
at the
# RFSwitch#
1.2, bold characters bold indicate the relation
prompt are