Output Format
On the [Output Format] screen, you can configure features for outputting documents.
The following shows the reference section for each feature.
1
2
Select the [Output Format] tab, and
then select a feature on the screen.
2 Sided Copying (Making 2-sided Copies)
This feature is the same as [2 Sided Copying] of the [Layout Adjustment] screen.
Refer to "2 Sided Copying (Making 2 sided Copies)" (P.69).
Copy Output (Outputting by Specifying Finishing)
You can specify the copy output method.
Note
• This feature does not appear for some models. An optional package is necessary. For more
If the offset stacking module is installed, the output position of copies is offset
alternately to distinguish each set of copies.
information, contact our Customer Support Center.
Output Format
3
79