Fuji Xerox ApeosPort-II C4300 User Manual page 477

Category
Error Code
C P F S M O
016-527
016-533
016-534
016-539
016-546
016-574
016-575
016-576
016-577
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
O [Cause] LDAP server SSL authentication error. This is an SSL
authentication internal error.
[Remedy] Software has a problem. Contact our Customer Support
Center.
O [Cause] Kerberos server authentication protocol error
[Remedy] The time difference between the machine and the
Kerberos server exceeded the clock skew limit value set
on the Kerberos server. Check if the clocks on the
machine and Kerberos server are correctly set. Also
Check the settings of the summer time and the time zone
as well on the machine and Kerberos server.
O [Cause] Kerberos server authentication protocol error
[Remedy] The realm set on the machine does not exist on the
Kerberos server, or the Kerberos server address set on
the machine is invalid for connection. Check if the realm
name and the server address have been correctly set on
the machine. For connection to Windows 2000 or Windows
2003 Server, specify the realm name in uppercase.
O [Cause] Kerberos server authentication protocol error
[Remedy] An error occurred on the software. Contact our Customer
Support Center.
O [Cause] A general user tried to obtain the information of another
user.
[Remedy] Contact our Customer Support Center.
O [Cause] When accessing the DNS, unable to resolve the host
name or the server name of the FTP server during the
transfer via FTP of [Scan to PC].
[Remedy] Check the connection to the DNS. Check if the FTP server
name is registered correctly on the DNS.
O [Cause] When accessing the DNS, the DNS server is not set
properly during the transfer via FTP of [Scan to PC].
[Remedy] Specify the correct DNS server address. Specify the
forwarding destination FTP server address using the IP
address.
O [Cause] Unable to connect to the FTP server during the transfer via
FTP of [Scan to PC].
[Remedy] Check if the forwarding destination FTP server and the
machine are set up properly for the network
communications. For instance, check the following:
The IP address of the server is set correctly.
The network cables are plugged in securely.
O [Cause] Unable to connect to the FTP service of the forwarding
destination server.
[Remedy]Take one of the following actions:
Check if the FTP service of the server is activated.
Check if the FTP port number of the server and the FTP
port number registered on the machine are the same.
Cause and Remedy
Error Code
15
475