Fuji Xerox ApeosPort-II C4300 User Manual page 211

Note • For 2-sided printing, the last page becomes blank when the total number of printed pages is
odd. For printing of multiple documents, a blank page is inserted after the final page of each
document.
• If a different size document is included in multiple documents, it may be printed in improper
orientation.
• [Batch Print] is not available while interrupting another job.
• [Batch Print] is not available for fax/iFax documents such as confidential polling reserved
documents, fax confidential reception documents, and iFax confidential reception
documents.
Quantity
Allows you to change the quantity.
Paper Supply
Allows you to select paper.
Note • When printing the fax document for Private Polling and Fax to Mailbox, if [Tray Mode] in
[Receive Paper Size] is selected, the document will be printed automatically on the paper
loaded on the bypass tray in case the specified paper tray cannot be used. For information
on [Receive Paper Size] settings, refer to "Receiving Paper Size" (P.317)
2 Sided Printing
Allows you to set 2-sided printing.
Output
Allows you to set stapling, punching, and output trays.
The following table shows the stapled/punched positions with the example of [1 Staple]
for stapling and [2 Holes] for punching for documents stored in a mailbox by specifying
[Save to Mailbox] on a print driver and for scanned documents.
For documents stored in a mailbox by specifying [Save to Mailbox] on a print driver
Original
Stapled
Position
Punched
Positions
Printing/Deleting Documents in the Mailbox
Report
Report
Report Report
6
209