Fuji Xerox ApeosPort-II C4300 User Manual page 508

15 Problem Solving
Error Code
C P F S M O
033-725
033-726
033-727
033-728
033-730
033-731
15
033-733
033-734
033-735
033-736
033-737
033-738
033-740
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
506
Category
O [Cause]
[Remedy] Remove unnecessary data from the hard disk to increase
O [Cause]
[Remedy] No operation is necessary.
O [Cause]
[Remedy] No operation is necessary.
O [Cause]
[Remedy] No operation is necessary. The machine will automatically
O [Cause]
[Remedy]Turn the machine off and on. If the machine conditions are
O [Cause]
[Remedy] The Auto Print processing of the received fax document
O [Cause]
[Remedy] Turn the machine off and on. If the machine conditions are
O [Cause]
[Remedy] No operation is necessary.
O [Cause]
[Remedy] Turn the machine off and on. If the machine conditions are
O [Cause]
[Remedy] No operation is necessary.
O [Cause]
[Remedy] Try again.
O [Cause]
[Remedy] No operation is necessary.
O [Cause]
[Remedy] No operation is necessary.
Cause and Remedy
The hard disk is full.
free disk space.
The received document was printed with the single sided
printing, because the 2-sided printing is not available for a
mixed sized document.
The received page was printed without being rotated,
because its data volume was too large to change the
orientation automatically.
The Auto Print formatting of the received fax document
was interrupted by a manual print operation.
start the Auto Print job after manual printing.
An error occurred during fax transmission.
not improved by performing the relevant remedy, contact
our Customer Support Center.
The print job for the received fax document was
interrupted.
was interrupted by a manual print operation. No operation
is necessary.
An error occurred during fax transmission.
not improved by performing the relevant remedy, contact
our Customer Support Center.
The print job of the received fax document was interrupted
by a report job.
An error occurred during fax transmission.
not improved by performing the relevant remedy, contact
our Customer Support Center.
The forwarding job was interrupted because the data
volume exceeded the upper limit.
An error occurred during fax transmission.
Received abnormal JBIG data.
The print job for the received fax document was
interrupted.