Supplies - Fuji Xerox ApeosPort-II C4300 User Manual

Supplies

You can check the status of consumables on the [Supplies] screen. The status of
consumables is shown as "OK", "Replace Soon (Order Now)", or "Replace Now". For
toner, the amount is shown in percentage (0 to 100%).
The following describes the procedure for checking the status of consumables.
For information on replacing consumables, refer to "Maintenance" (P.409).
1
Press the <Machine Status>
button.
2
Select the [Supplies] tab.
Note • Select [
On the [Supplies] screen, you can check the following items.
Note • The items displayed vary depending on the options installed.
• Staple Cartridge is displayed when one of the following options is installed: B Finisher, C
• Punch Scrap Container is displayed when one of the following options is installed: C Finisher
• Booklet Staple Cartridge is displayed when C Finisher is installed.
Black Toner [K]
Cyan Toner [C]
Magenta Toner [M]
Yellow Toner [Y]
Drum Cartridge [A1]
Drum Cartridge [A2]
Drum Cartridge [A3]
Important • If using a partly consumed toner cartridge (such as a toner cartridge removed from another
] to return to the
previous screen or [ ] to
move to the next screen.
Finisher, and C Finisher with Booklet Maker.
and C Finisher with Booklet Maker.
ApeosPort-II C4300/C3300/C2200 or DocuCentre-II C4300/C3300/C2200 unit), the status
shown may not match the actual remaining amount. When replacing toner cartridges, we
recommend you use new ones.
Drum Cartridge [A4]
Waste Toner Container[B]
Staple Cartridge [R1]
Booklet Staple Cartridge [R2]
Booklet Staple Cartridge [R3]
Hole Punch Container [R4]

Supplies

12
387