Fuji Xerox ApeosPort-II C4300 User Manual page 444

15 Problem Solving
An error
message
appears after
paper is loaded
in the Tray 5
(Bypass) and the
<Start> button is
pressed.
Documents are
often jammed.
15
A corner of the
document is
folded.
Color copies
cannot be made.
Stapler Faults
442
Symptom Cause
Check the positions of the
paper guides of the Tray 5
(Bypass).
Are the suitable types of
documents used?
Are you trying to copy
irregular shaped
documents, business cards,
transparencies, or thin
documents?
Are you trying to copy
documents with sticky
labels, paper clips or
adhesive tape?
Are the document guides in
the correct positions?
Is a piece of torn paper
remaining in the document
feeder?
Is the [Mixed Sized
Originals] setting set to [On]
when you copy originals of
different sizes?
Is an A5 document loaded
in landscape orientation
( ) on the document
feeder when the Mixed
Sized Originals feature is in
use?
Is the document curled?
Is [Output Color] set to
[Black]?
Is a message displayed on
the touch screen, prompting
you to replace the toner
cartridge?
-
Remedy
Adjust the paper guides to the correct
positions.
Refer to "Loading Paper in the Tray 5
(Bypass)" (P.250).
Correctly load documents suitable for the
document feeder.
Refer to "Step 1 Loading Documents" (P.48).
Remove sticky labels, paper clips or
adhesive tape from the document before
copying.
Adjust the document guide positions.
Refer to "Step 1 Loading Documents" (P.48).
Open the document feeder cover and
check inside.
Refer to "Document Jams" (P.543).
Set [Mixed Sized Originals] to [On].
Refer to "Mixed Sized Originals (Scanning
Different Size Documents Simultaneously)"
(P.73).
Load the A5 document in portrait
orientation ( ).
Flatten out the curl and load the document
again.
Select [Color] for [Output Color].
Refer to "Output Color (Selecting the Color to
Copy)" (P.60).
Replace with the toner cartridge of the
color indicated in the message.
Refer to "Replacing Consumables" (P.410).
Refer to "Stapler Faults" (P.545).