Fuji Xerox ApeosPort-II C4300 User Manual page 516

15 Problem Solving
Error Code
C P F S M O
035-743
035-744
035-745
035-746
035-747
035-748
035-749
035-750
15
035-751
035-752
035-753
035-754
035-755
035-756
035-757
035-758
035-759
035-760
035-761
035-762
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
514
Category
O [Cause]
[Remedy] Check the destination phone number, check also if the
O [Cause]
[Remedy] Is the telephone line correctly connected?
O [Cause]
[Remedy] No action is necessary.
O [Cause]
[Remedy] Ask the recipient if the telephone line and telephone
O [Cause]
[Remedy] Turn the machine's power switch on to send the fax again.
O [Cause]
[Remedy] No action is necessary.
O [Cause]
[Remedy] Ask the sender to reduce the number of pages at one
O [Cause]
[Remedy] Turn the machine off and on. If the error persists, contact
O Refer to 034-508.
Cause and Remedy
Unable to communicate. The phone number is incorrect or
the destination machine does not have the feature you
specified.
destination machine has the feature you specified, and
then try again.
The fax network does not respond.
This may be caused by the following. Check them and
then send the fax again.
You may not have a fax network contract, or the fax
network may have a problem.
When connecting the machine to the fax network, enter
two pauses after "161" and "162", then dial the telephone
number.
The dialing or transmission was interrupted by the <Stop>
button.
The number was re-dialed the specified number of times,
but the destination machine did not respond.
switchboard for the destination machine are defective.
The communication was interrupted by a power-off
operation or with the <Reset> button.
If the machine conditions are not improved by performing
the relevant remedy, contact our Customer Support
Center.
The dialing or transmission was interrupted by the <Stop>
button.
Memory became insufficient when attempting to receive
more than 999 pages of fax document.
transmission.
An error occurred during fax transmission.
our Customer Support Center.