Fuji Xerox ApeosPort-II C4300 User Manual page 95

1
Select [On].
2
Set the start number using [
[ ] or with the numeric keypad.
Off
No control number is printed.
On
A control number is printed. Enter the starting number of the control number.
[Watermark - Text] Screen
Select the text to print on the copy.
1
Select [On].
Select any text.
Off
No text is printed.
On
Text is printed. You can select the text for stamp. You can specify text from 3 preset
text or the text set in the System Administration mode.
For information on how to register text, refer to "Custom Text 1 to 3" (P.280).
[Watermark - User Account Number] Screen
When using User Administration or Auditron Administration, a user account number is
printed.
Note • [User Account Number] is the No. (User Administration Number) registered by users in
• Displays when using Auditron Administration. If the Login Setup/Auditron Administration
1
Select [On].
Off
The user account number is not printed.
On
The user account number is printed. However, nothing will be printed if user
authorization has not taken place.
[Watermark - Date & Time] Screen
You can print the date and time that copying was started.
For information about the format for the date, refer to "Date Format" (P.279).
] and
Login Setup/Auditron Administration.
feature is used, [User Account Number] is displayed even when no data is collected. In this
case, even if [On] is selected for [User Account Number], the No. registered by users (User
Administration Number) is not printed on.
Output Format
3
93